If you’re looking for an easy way to make your vacuum cleaner work a little bit harder, check out this simple tutorial on how to make a cardboard vacuum cleaner!

What You'll Need

To make a Stick vacuum cleaner with cardboard, you'll need the following supplies:

-Cardboard box
-Tape measure
-Circular saw
-Drill
-3/8 inch hole saw
-Vacuum cleaner hose
-Pipe cleaners or straws
-Elmer's Glue
-Metal rulers or a straight edge
-Sandpaper (220 grit)
-Sticker labels or adhesive dots
Assembly Instructions: 1. Cut the cardboard box into thirds so that it is the same length as your vacuum cleaner hose. Tape one end of the hose to one end of each piece of cardboard. 2. Drill a 3/8 inch hole in the center of each piece of cardboard. 3. Saw a circular opening around the hole you drilled in each piece of cardboard. 4. Glue one end of each pipe cleaner or straw to one end of each piece of cardboard. 5.Attach the other end of each pipe cleaner or straw to your vacuum cleaner by screwing it on tight with a Phillips screwdriver. 6. Turn on your vacuum cleaner and wait for it to get sucked up into the filter bag. When it stops, release the suction and take out your

How to Make the Vacuum cleaner?

Making a Cordless vacuum cleaner with cardboard is an easy and effective way to clean up your space. All you need is some cardboard, a vacuum cleaner, and some supplies.

Start by cutting the cardboard into small pieces the size of the opening on your vacuum cleaner. Make sure to cut off any excess so that the pieces fit snugly in the opening.

Attach the pieces of cardboard to the vacuum cleaner using hot glue or a similar adhesive. Be sure to position the pieces so that they catch all of the debris.

turn on your vacuum cleaner and wait until it has reached full power before Vacuuming. This will help to move the pieces of cardboard around and get rid of all of the dirt and dust.

Tips for Making a Better Vacuum Cleaner

Making a vacuum cleaner out of cardboard is not only easy, but it’s also a lot cheaper than buying Canister vacuum cleaner as well as WetDry vacuum cleaner . Here are some tips for making a DIY cardboard vacuum cleaner:

1. Start by gathering all the materials you need. You will need a box of paper towels, some old clothes, an old vacuum cleaner hose, and some packing tape.

2. Cut the paper towels into small squares or triangles. Make sure to fold them so that they form a nicepackage that doesn’t crease easily.

3. Cut the old clothes into small pieces and place them inside the paper towel package.

4. Wrap the empty end of the vacuum cleaner hose around the cardboard tube several times, being careful not to overlap any edges. Tape it securely in place.

5. Place the vacuum cleaner on its side on some sturdy surface and turn it on to full power. Hold the cardboard tube close to the exhaust fan and wait until the vacuum cleaner has picked up all of the debris inside the tube!